55” Endoscopic Monitor

Surgery monitors can be widely used for variety of medical scenes such as surgery and minimally invasive surgery. Operating room(OR) display is suitable for DOR, DSA, training and video broadcast.

Window-split Technique

Supports physical quad-window split function, with independent adjustment capability of each window input source to meet the requirements of DOR.

Excellent Industrial Design

With a slim exterior and ultra-narrow bezel design, you have the flexibility to choose the installation solution (suspension/embedded wall).

Abundant I/O Design

Support multi-channel HD and UHD signal input and output, providing you with flexible window layout mode, fully meeting the requirements of DOR.

Optical Bonding

Employs high-efficient long-life LCD panel with LED backlit which can meet variety of requirements such as lower noise as well as cleanliness.

Dual Power Supply Design

Dual power supply system, so if one power system fails, the display will switch to another power system seamlessly without affecting the operation process.

Perfect Image Quality

With FHD and 4K resolution displays, it can represent richer image details and more accurate colour reproduction effects, to help surgeons improve surgical efficiency.

Machine structure
Protection level: Front shell: IP65; rear shell: IP22; machine: IP22
Weight: ≤ 37kg
Fixing equipment: Meeting the requirements of compatible design for hanging on the wall, lifting, and embedded in the wall
Hanging hole spacing: 400 x 200 VESA

LCD screen
Size: 55"
Screen ratio: 16:9
Resolution: 3840 x 2160
Pixel pitch: 0.315 mm x 0.315 mm
Color depth: 8 bits + FRC
Refresh rate: 120 Hz
Backlight: D-LED, 60 partitions, support for LD
Brightness: 600 cd/m2 (min, full white), 1000 cd/m2 (min, peaking)
Contrast ratio: 4000:1 (typ)
Color gamut: 100% NTSC (CIE1976)
Brightness uniformity: 75%
Response time (typical value): 6 ms (typ)
Visible angle of the contrast ratio: ≥ 178  (CR 10:1)

Video input: HDMI2.0 x 1, Single-link DVI x 4, DP1.4 x 1, VGA x 1, SDI(4K) x 2, 3G-SDI x 1
Video output: HDMI1.4 x 1, 3G-SDI x 1
Remote interaction interface: RS485 x 2 (RJ45 terminal, which is compatible with full duplex and half duplex)
Service interface: Upstream USB interface x 2, USB interface for upgrade x 4, Debugging interface x 2
DC output: 5 V 1 A
DDC/AUX communication: Yes
Button type: Front touch button
Sensor: Backlight sensor (stable backlight)
LED indicator: One LED indicator is reused with the LOCK button. The indicator color is green in the working state and is orange in the standby state.
Signal processing level: 16 bits
Gamut management: BT.709 and BT.2020
Default factory brightness: 400 nits
Image mode: Preset (DSA parameters), DICOM, Video, Text, Hybrid GAMMA, User1, User2, User3, and User4
No screen flickering upon photo taking: Yes
Function and software
Button definition: General buttons: LOCK, MENU, UP, DOWN, and BACK, Shortcut buttons: Display Mode (PIP/PBP), Window Channel Configuration, INPUT, Image Mode, and LIGHT
Multi-window display: PBP/PIP, three-window screen, and four-window screen
Separate adjustment for image quality in each window: Yes
One-click switching for a window layout: Yes
Multi-window layout setting: Yes
Upgrade mode: Upgrade by using a USB flash drive
Boot screen: Hisense Medical (can be turned off)
Image rotation/mirroring: Yes

Power supply
Power supply requirement: Authentication requirement: AC 220 V 50 Hz, Design requirement: AC 100 V-AC 240 V 50/60 Hz
Maximum power: ≤ 300 W
Duplicate supply design: Yes
Device type: I class

Temperature: Working temperature: 10 C-35 C Storage/Transportation temperature: -20 C-60 C
Humidity: Working humidity: 20%-85%, Storage/Transportation humidity: 10%-90% R.H.
Atmospheric pressure: Working atmospheric pressure: 700-1060 hPa Storage atmospheric pressure: 200-1060 hPa
Contact us.

Hisense B2B Europe
Beechavenue 139,
1119 RB Schiphol-Rijk,

Hisense B2B USA
7310 McGinnis Ferry Road,
Suwanee, GA 30024,