32” Endoscopic Monitor

Surgery monitors can be widely used for variety of medical scenes such as surgery and minimally invasive surgery. Operating room(OR) display is suitable for DOR, DSA, training and video broadcast.

Window-split Technique

Supports physical quad-window split function, with independent adjustment capability of each window input source to meet the requirements of DOR.

Excellent Industrial Design

With a slim exterior and ultra-narrow bezel design, you have the flexibility to choose the installation solution (suspension/embedded wall).

Abundant I/O Design

Support multi-channel HD and UHD signal input and output, providing you with flexible window layout mode, fully meeting the requirements of DOR.

Optical Bonding

Employs high-efficient long-life LCD panel with LED backlit which can meet variety of requirements such as lower noise as well as cleanliness.

Dual Power Supply Design

Dual power supply system, so if one power system fails, the display will switch to another power system seamlessly without affecting the operation process.

Perfect Image Quality

With FHD and 4K resolution displays, it can represent richer image details and more accurate colour reproduction effects, to help surgeons improve surgical efficiency.

Type: AHVA
Backlight: LED
Top polarizer type: Anti-glare
Native resolution: 3840 (H) x 2160 (V) (pixels)
Active screen size: 32-inch
Pixel pitch: 0.1845 mm x 0.1845
Brightness: 700 cd/m2
Contrast ratio: 1350:1 (typ)
Visible angle: 178 , 178  (CR ≥ 10)
Uniformity: ≥ 75%
Number of colors: 1,073,741,824 (colors)

Input terminal: DVI-D, 3G-SDI/HD-SDI x 5, DP x 1, and HDMI x 1
Output terminal: DVI-D x 1 and 3G-SDI/HD-SDI x 5
Plug and play: Support for DDC
Service interface: An upstream USB interface (firmware upgrade)
Scanning frequency: 3840 x 2160 @ 60 Hz
Power supply: Input: 100-240 V, 50-60 Hz; output: DC 24 V 6.25 A
Power output: USB interface (5 V, 1 A)
Power consumption: < 150W
Power management: DVI DMPM, DisplayPort 1.2
Backlight stability: Support, backlight sensor
Power button: Support, ON/OFF
LED indicator: One LED indicator is reused with the LOCK button. The indicator color is green in the working state and is orange in the standby state.

Operating temperature: 0 C to +40 C (most secure); 10 C to 35 C (best performance)
Transport and storage temperature: -20 C to +60 C
Operating humidity: 20% to 85%
Transport and storage humidity: 5% to 85%
Operating atmospheric pressure: 700-1060 hPa
Transport and storage atmospheric pressure: 500-1060 hPa

Basic: Power line x 1 (3 metres), DVI signal line x 1 (1.5 metres), 3G-SDI signal line x 5 (1.5 metres), User manual x 1, Screw x 4

Contact us.

Hisense B2B Europe
Beechavenue 139,
1119 RB Schiphol-Rijk,

Hisense B2B USA
7310 McGinnis Ferry Road,
Suwanee, GA 30024,